Technical Details
Technical Details
Technical Details
Technical Details

The choices made at the design level have allowed us to obtain a product with a large range of use and a wide possibility of adjustment. In the new Italvibras electromagnetic vibrators the “passive” mass laying on the weight of the vibrating machine is very reduced, allowing a better operating efficiency. Adjustment can be tuned with vibrator installed on the machine: no special tools needed.

IDENTIKIT

no EX certification

FEATURES

Power supply

Voltage from 105V to 600V, 25/50Hz (in 50Hz net) and 30/60Hz (in 60Hz net); frequency control system available on request

Functioning

Continuous service (S1) or intermittent services, with immediate start/stop after switching.

Range of applications

Wide range extended from 25 to 500 kg.

Mechanical protection

IP65 according to IEC/EN 60529

Protection against mechanical impacts/span>

IK08 according to IEC/EN 62262

Insulation class

Class F (155°C)

Tropicalization

Standard on all vibrators, with vacuum encapsulated coil.

Ambient temperature

From -20°C to +40°C. Versions for higher or lower temperatures are available on request

Thermal protection

Optionally

Fixing of the vibrator

In all positions and therefore without restriction. Small fixing foot

Connection

Supplied with 2m cable. Other connections available on request.

Base

In cast iron

Cover

In aluminium or cast iron. Easy fitting. Protected from water and dust by seal

Magnet

Fully vacuum encapsulated in epoxy resin

Certification

Conformity with all appliable Directives. Version suitable for potentially explosive atmospheres

Surface treatment

As standard: electrostatic surface treatment based on polymerised epoxy polyester powder in oven at 200°C, tested in salt spray for 500 hours. On request STEEL IT polyurethane resin coating also available

CERTIFICATIONS